Pallet Stabilizing Glue, Pallet Anti-Slip Glue. Reduce the use of disposable plastic pallet film PE stretch film!During the production and transportation of many commodities, PE stretch film has been widely used in the pallet stabilizing process to ensure the safety and stability of the commodities during storage and transportation. However, the plastic stretch film used to cause the consumption of a large amount of disposable plastic.Logistics and warehousing reduce the use of single-use plastics. Why do we need to reduce plastics?An estimated 8 million tons of plastic end up in the ocean every year, mostly plastic packaging. The vast majority of plastic packaging is single-use and is discarded after a short period of use and becomes garbage.More than 100,000 marine creatures die each year due to entanglements in plastic waste. For every ten species affected by marine debris, more than one is at risk of extinction. What we should do is trying our best to reduce the amount of plastic waste flowing into the natural environment and start changing our lives.With the global trend of carbon reduction and the continuous improvement of regulations banning disposable plastics, and the production of plastics will continue to increase carbon emissions, it is urgent to deal with the rising global temperature year by year, and we need you and me to take action to change our lives. Create a new revolution in logistics, using environmentally friendly hot melt adhesive / pallet anti-slip adhesive to replace PE stretch filmIt can increase the firmness between packaging materials and reduce the usage of disposable stretch film. Compared with using PE stretch film for fixation, hot melt adhesive anti-skid reduces the load during movement. Greatly improve stack stability, slip resistance, integrity and safety. Moreover, the palletizing process does not require the use of PE stretch film, which saves material and equipment costs, conforms to the global trend of environmental protection and carbon reduction, and meets the requirements of global green packaging regulations.The product can instantly spray anti-slip glue on pallets on the production line. It is easy to identify boxes and the operation speed is fast. The use of PE stretch film can be reduced, which can increase the integrity of product outer packaging. Product batches, barcodes, and markings are obvious, warehousing management is optimized, and transportation safety and aesthetics are taken into consideration. At the same time, labor costs are reduced and production efficiency is improved. Environmentally friendly hot melt adhesive/pallet anti-slip adhesive is suitable for a variety of different packagingEnvironmentally friendly hot melt adhesive can be sprayed on commodity packaging of various sizes. The sizes and stacking methods of suitable packaging are diverse and unrestricted.Environmentally friendly hot melt adhesive can spray various shapes of adhesive on packaging according to different packaging requirements, making product stacking safer.Tex Year pallet anti-slip adhesives are available in three series: EVA, PO and TPR. It can fully meet the needs of outer carton packaging material and anti-slip effect. Benefits of using pallet anti-slip glueProduct packaging can be quickly separated and restacked.Stack packaging occupies less space and optimizes the warehousing process.Pallet anti-slip glue can prevent products from sliding sideways, ensuring product safety and avoiding losses.Carry out warehousing, inventory, and shipping more efficiently.Reduce the softening of cartons caused by water vapor products, ensuring product quality.CONTACT US if you need further assistance. Our professional team of technical solution will be your strongest back up.

Sustainable new milestones! Plastic bottle recycling friendly, easy-to-peel label hot melt adhesive enters international market.Good news! Tex Year GPS green products were successfully promoted to the Japanese market!http://www.labelshimbun.com/news/2493 We are happy to tell you that Japan's 《ラベル新聞社》 published an interview with Nippon News Agency on October 15th.Share the English translation of the press release as follows:Taiwan-based adhesive manufacturer Tex Year Enterprise Co., Ltd. has recently expanded sales to the Japanese label market, focusing on functional hot melt adhesives. They are actively promoting recyclable adhesives that peel easily under alkaline warm water. Founded in 1976, Tex Year Enterprise Co., Ltd. has grown by developing, manufacturing and selling hot-melt adhesives for labels and tapes. Currently, the company has nine production plants in Taiwan, as well as China, Vietnam, India and Poland, and is committed to global expansion. In recent years, they have also continued to extend their adhesive needs in industrial parts applications such as precision instruments. About Label AdhesivesFor label adhesives, they provide three types of products: ▽hot melt type, ▽emulsion type and ▽UV curing type. Not only are they highly versatile, they can also meet various needs such as easy peeling, soft bonding, low temperature resistance, tire and RFID use, etc., and have achieved practical results around the world.    Rubber-based Adhesives: 973L & 903GIn recent years, in order to contribute to the realization of a sustainable (environmental) society, they have also developed environmentally friendly adhesives that promote container recycling. Hot melt adhesive products "973L" and "903G" were developed under this theme. These adhesives are based on rubber and can be easily peeled off the container under alkaline warm water.    973L is an adhesive used in labeling. It was developed in cooperation with an Australian brand. It is suitable for laminating containers such as high-density polyethylene (HDPE) and PET, and is also suitable for automatic labeling machines.    903G is an adhesive for tape labels designed for quick adhesion on PET bottles and was jointly developed with a Asia brand. It is an adhesive that is applied to the back of the substrate and is suitable for low viscosity and low temperature applicators. In addition, it can still maintain excellent adhesive properties under refrigerated conditions. It has also been certified for alkaline warm water cleaning performance after testing by a third party. The manual peeling performance is also very good, and no residue is left on the container after peeling, so it has the advantage that impurities will not be mixed during the recycling process of the container.    In Japanese MarketRegarding the business development strategy of these two hot-melt adhesives in the Japanese market, the company said: "Especially for adhesive paper (label) manufacturers and label printing companies engaged in self-coating, we hope to supply 973L. We will also consider small batch supply. 903G is a brand manufacturer that can meet the needs of converters and beverage and alcohol fields." In addition, regarding future goals, they stated that "the company plans to continue to focus on the development of adhesives based on customer needs to meet the needs of the Japanese adhesive label market, and to seek cooperation with partners who can develop the market."CONTACT US if you need further assistance. Our professional team of technical solution will be your strongest back up.

High Temperature Resistant Glue GuideWhat is High Temperature Glue?High-temperature glue, often referred to as heat-resistant adhesive or high-temperature adhesive, is a type of adhesive that is designed to withstand elevated temperatures without losing its bonding properties or breaking down. These glues are formulated to maintain their strength, flexibility, and adhesion capabilities even when exposed to high temperatures, typically in the range of 300 degrees Fahrenheit (149 degrees Celsius) or more.When choosing a high-temperature glue, it's important to consider the specific temperature range it can tolerate, as well as the bonding material and the intended application. Different formulations may be better suited to different situations, so selecting the right adhesive for your needs is crucial to ensure a durable and reliable bond under high-temperature conditions. How does High Temperature Resistant Glue Work?High temperature resistant glue works by using specialized formulations and chemical properties to maintain its strength, flexibility, and adhesion capabilities at elevated temperatures. The exact mechanisms can vary depending on the type of adhesive, but here are some common ways in which high-temperature resistant glue works:Thermosetting Polymers:Many high-temperature resistant adhesives are based on thermosetting polymers. These polymers undergo a chemical change when exposed to heat, which causes them to cross-link and harden. Once the adhesive has cured and undergone this chemical transformation, it becomes more stable and heat-resistant. The curing process typically involves the application of heat, which can be done during the manufacturing process or when the adhesive is used.Silicone-Based Formulations:Silicone adhesives are known for their exceptional heat resistance. They work by maintaining their flexibility and stability even at high temperatures. Silicone molecules have a unique structure that allows them to withstand thermal stress without breaking down. They can also maintain their elasticity over a wide temperature range.Epoxy Resins:Epoxy adhesives often use a two-part system where a resin and hardener are mixed together before application. The chemical reaction between these two components, known as curing or polymerization, is initiated by heat or a catalyst. This reaction forms a strong and heat-resistant bond. Epoxy resins can be formulated to withstand high temperatures by using heat-resistant additives and carefully controlling the curing process.Cyanoacrylate (Super Glue):Heat-resistant cyanoacrylate adhesives are designed to maintain their bond strength even at elevated temperatures. They work through a process called anionic polymerization. When the adhesive comes into contact with moisture on the surfaces to be bonded, it rapidly polymerizes and forms a strong bond. Some specialized cyanoacrylates can withstand temperatures up to 250°C (482°F).Polyurethane Adhesives:Polyurethane adhesives are known for their flexibility and resistance to heat, chemicals, and moisture. They typically cure by a moisture-triggered process, and the resulting bonds can remain stable even at high temperatures. Applications of High Temperature Resistant GlueHigh-temperature glue is used in various applications where regular adhesives would fail due to heat exposure. Some common applications for high-temperature glue include:Automotive Repairs:High-temperature glue can be used for bonding components in engines, exhaust systems, and other areas that experience high heat.Electronics:It is employed in the manufacturing and repair of electronic devices where components generate heat, such as circuit boards, power supplies, and LED lighting.Industrial Equipment:High-temperature adhesives are used in the assembly and repair of machinery and equipment that operate at high temperatures, including ovens, furnaces, and boilers.Aerospace:They are used in the aerospace industry for bonding and sealing components on aircraft and spacecraft that must endure extreme temperatures during flight.Household Repairs:High-temperature glues can be used for various household repairs, including fixing appliances, cookware, and barbecue grills. Types of High Temperature Resistant GlueCommon types of high-temperature adhesives include:Silicone Adhesives:These are known for their excellent heat resistance and flexibility. They can withstand temperatures ranging from -40°C to 200°C (-40°F to 392°F) or even higher in some specialized formulations.Cyanoacrylate (Super Glue):Some cyanoacrylate adhesives are formulated to be heat-resistant and can tolerate temperatures up to 250°C (482°F).Epoxy Resins:Certain epoxy adhesives are designed to withstand high temperatures and can be used in applications where temperatures can reach 300°C (572°F) or more.Polyurethane Adhesives:These adhesives can offer good heat resistance and are often used in automotive and industrial applications. What should be Considered When Buying High Temp Glue Besides Heat ResistanceThere are several important factors to consider beyond heat resistance to ensure that you select the right adhesive for your specific application. Here are some key considerations:Temperature Range:While heat resistance is a crucial factor, it's essential to know the specific temperature range the adhesive can withstand. Different high-temperature glues have varying upper limits, so make sure the adhesive's range aligns with your application's temperature requirements.Substrate Compatibility:Consider the materials you intend to bond. Ensure that the adhesive is compatible with the substrates, such as metals, plastics, ceramics, or other materials. Some high-temperature glues may be better suited for certain materials.Curing Time:The drying or curing time can vary between different high-temperature adhesives. Some may require longer curing times than others, so factor this into your project timeline.Viscosity:Viscosity refers to the thickness or flowability of the adhesive. High-temperature glues come in various viscosities, from thin liquids to thick gels. Choose a viscosity that suits your application, taking into account factors like gap size and how the adhesive will be applied.Bond Strength:Consider the required strength of the bond for your application. High-temperature glues may have different bonding strengths, so choose one that meets your specific needs.Certifications and Approvals:Depending on your industry or application, you may require adhesives with specific certifications or approvals. For example, some adhesives may need to meet certain safety standards or regulations. Check if the adhesive has relevant certifications if needed. Tex Year High Temperature Glue RecommendationsPolyamide Based Hot-Melt Adhesive series:UL hot melt adhesives TY-863H1: UL94V0 and ROHS certified, heat resistant, oil resistant, chemical resistant, work perfectly for different types electronic parts bonding.CONTACT US if you need further assistance. Our professional team of technical solution will be your strongest back up.

A Cloth & Fabric Glue Full GuideWhat is Cloth & Fabric Glue?Cloth and fabric glue, also known as fabric adhesive or textile adhesive, is a type of adhesive specifically designed for bonding fabrics and textiles together. It is a versatile and convenient alternative to traditional sewing for various fabric-related projects. Why Use Cloth Glue? Cloth glue is used primarily for its convenience and versatility in bonding fabrics together, whether for quick repairs, crafting, or attaching decorative elements to fabric surfaces. It offers an accessible and easy-to-use solution for various fabric-related needs. Advantages of using Cloth GlueUsing cloth glue, offers several advantages in various fabric-related projects and applications:No-Sew Solution:One of the primary advantages of cloth glue is that it eliminates the need for sewing, making it accessible to individuals who may not have sewing skills or equipment. This is especially beneficial for quick fixes and simple fabric projects.Time Efficiency:Cloth glue is significantly faster than sewing, allowing for quick repairs and the completion of fabric projects in less time. It&#39;s an excellent option when you need to make speedy repairs or complete last-minute projects.Versatility:Fabric glue is formulated to bond a wide range of fabric types, including cotton, denim, silk, polyester, and more. This versatility makes it suitable for various fabric-related applications without the need for specialized needles or threads.Bond Strength:Fabric glue is designed to create strong bonds between fabric pieces. When properly applied and allowed to cure, the bond can be durable and withstand everyday wear and tear, including washing and drying.Temporary or Permanent:Depending on the type of fabric glue used, you can achieve both temporary and permanent fabric bonds. Some fabric glues are designed to be washable but can be removed when needed, while others provide a more permanent bond.In summary, cloth glue offers advantages such as speed, versatility, ease of use, and strong bonding capabilities, making it a valuable tool for both quick repairs and a wide range of fabric-related projects. Types of Cloth GlueThere are several types of cloth glue or fabric adhesives available, each designed for specific purposes and fabric types. Here are some common types of cloth glue:Permanent Fabric Glue:Permanent fabric glue is designed to create a strong and durable bond that can withstand washing and frequent use. It&#39;s ideal for mending clothing, attaching patches, and other fabric applications where a long-lasting bond is required.Temporary Fabric Glue:Temporary fabric glue is formulated to provide a temporary bond that can be easily removed when needed. It&#39;s often used for basting fabric pieces together before sewing, creating temporary fabric arrangements, or making adjustments to clothing that may need to be altered later.Fabric Fusion Adhesive:Fabric fusion adhesive is a type of fabric glue that is known for its ability to bond fabric-to-fabric and fabric-to-other materials, such as wood or paper. It&#39;s often used in mixed-media crafting projects.Heat-Activated Fabric Adhesive:This type of fabric adhesive requires heat to activate the bonding process. It is often used in conjunction with an iron or heat press to create a secure bond between fabric layers. Heat-activated fabric adhesive is commonly used for appliqué work.Spray Fabric Adhesive:Spray fabric adhesive comes in an aerosol can and is sprayed onto fabric surfaces. It is commonly used in quilting and upholstery projects to temporarily bond fabric layers together for sewing or quilting.Talking about formulation, here are some common ingredients and components that you might find in the formulation of fabric adhesives:Polymer Resins:Most fabric glues contain polymer resins as their primary adhesive component. These resins are responsible for creating the bond between fabric fibers. Common polymer resins used in fabric glues include polyvinyl acetate (PVA) and acrylic resins.Solvents:Solvents are used to keep the adhesive in a liquid or semi-liquid state until it is applied. They also assist in the penetration of the adhesive into the fabric fibers. Common solvents include water and various organic solvents.Thickeners:Thickeners are added to control the viscosity of the glue, making it easier to apply and preventing it from running or dripping excessively. Common thickeners include cellulose derivatives and natural gums.Modifiers:Various modifiers may be included to enhance specific properties of the fabric glue, such as flexibility, adhesion strength, and resistance to environmental factors. These modifiers can include plasticizers, UV stabilizers, and cross-linking agents. Types of Fabric that can be GluedDifferent types of fabrics may require specific types of fabric glues or adhesives for optimal results. The choice of fabric glue depends on factors such as the fabric type, the intended use, and whether you need a temporary or permanent bond. Here are some common fabric types and the recommended types of fabric glues for each:Cotton and Cotton Blends:Recommended Glue: All-purpose fabric glue or permanent fabric glue.Use: Cotton fabrics are versatile and can be bonded with a wide range of fabric glues. Permanent fabric glue is suitable for long-lasting repairs and projects.Polyester and Synthetic Fabrics:Recommended Glue: All-purpose fabric glue or permanent fabric glue.Use: Fabric glues that work well with synthetic fabrics are suitable for polyester and blends. Ex: APO / APAO / Polyolefin Based Hot-Melt Adhesive series, PUR / Polyurethane Based Hot-Melt AdhesivesNylon:Recommended Glue: Permanent fabric glue or fabric glue designed for nylon.Use: Nylon can be challenging to bond due to its smooth surface, so specialized fabric glue may be necessary. Ex: APO / APAO / Polyolefin Based Hot-Melt Adhesive series, PUR / Polyurethane Based Hot-Melt AdhesivesLeather and Suede:Recommended Glue: Leather glue or suede glue.Use: Leather and suede require specialized adhesives designed for these materials. Ex: APO / APAO / Polyolefin Based Hot-Melt Adhesive series, PUR / Polyurethane Based Hot-Melt AdhesivesHow to Choose the Best Cloth Glue for You? Choosing the best cloth glue for your specific needs involves considering several factors, including sheer strength, color, water resistance, heat resistance, open time, and setting time. Here&#39;s how to make an informed choice based on these factors:Sheer Strength:Consider the type of fabric and the intended use. If you need a strong, permanent bond, opt for a fabric glue designed for high sheer strength. Check product labels and descriptions for information on shear or tensile strength, which indicates the adhesive&#39;s ability to withstand forces that can cause fabrics to slide against each other.Color:If the color of the adhesive is important for your project, look for fabric glues that dry clear or in a color that matches your fabric. Some glues are specifically designed to dry transparent or with minimal color change. Some fabric glues offer a choice of colors, allowing you to select one that blends seamlessly with your fabric.Water Resistance:Determine whether your fabric project will be exposed to water or moisture. If so, choose a fabric glue labeled as water-resistant or waterproof. Keep in mind that some fabric glues may offer limited water resistance, while others provide a high degree of protection against moisture.Heat Resistance:Consider whether your fabric project will be exposed to heat or hot conditions. If heat resistance is important, select a fabric glue designed to withstand high temperatures. Pay attention to the adhesive&#39;s heat resistance rating, which can vary among products.Open Time:Open time refers to the period during which the adhesive remains workable after application. Longer open times can be advantageous for complex or large projects, as they allow more time for positioning and adjusting fabric pieces. Check the product label or description for information on open time. Some fabric glues may offer extended open times, while others set quickly.Setting Time: Setting time refers to the time it takes for the adhesive to fully cure and create a strong bond. Faster setting times can be beneficial for projects that require a quick turnaround. Review the product information to determine the expected setting time. Some fabric glues may dry within minutes, while others may require several hours or more to fully set. Tex Year Cloth Glue RecommendationsPUR / Polyurethane Based Hot-Melt Adhesives: Functional Clothing Laminating AdhesivesR6920H: Fabric + Fabric <General> Ideal for lamination of water repellence and normal materials.R6935: Fabric + Film <High Water Repellence> Ideal for material with level 4 water repellence or above and for difficult-to-bond substrates, such as, nylon, taffeta, and Taslon.R6940: Fabric + Film <General-Soft> Ideal for material with level 4 water repellence or above and for difficult-to-bond substrates, such as, nylon, taffeta, and Taslon.R6942: Fabric + Film <Flame Retardant> Characterized by high flame retardant, which doesn’t allow PUR films after curing to be flamed by fire. Ideal for lamination of water repellence material to flame retardant material.CONTACT US if you need further assistance. Our professional team of technical solution will be your strongest back up.

The World Premiere Bio-based Compostable Hot Melt Adhesive for Hygiene ProductsWhat’s even more exciting is that this product has been adopted by major international sanitary materials manufacturers!Although the percentage of adhesive in hygienic products is only 5%, the breakthrough of this 5% key materials helps sanitary products decompose in the natural environment. At the same time, the compostable efficiency of the product is improved!The Advantages of Tex Year Bio-based Compostable Hot Melt Adhesive:Over 90% renewable raw materialsSafe, non-toxic, environmentally friendlyReduce carbon footprint and create sustainable valueObtained German DIN CERTCO international certificationApplication Advantages of Bio-based Compostable Hot Melt Adhesive in Sanitary Materials:The application of bio-based compostable hot melt adhesives in sanitary materials has multiple advantages, mainly focusing on degradability and environmental protection.Degradability: This is one of the most significant advantages. Bio-based compostable hot melt adhesive is made from bio-based materials that can quickly decompose into water, carbon dioxide and organic matter under certain conditions (such as a composting environment) without leaving behind harmful plastic waste. This helps reduce the accumulation of plastic in the environment and the potential harm it causes to ecosystems and wildlife.Environmentally Friendly: Bio-based compostable hot melt adhesive uses natural and renewable bio-based materials, which has less negative impact on the environment than traditional petrochemical plastics. This helps reduce dependence on finite petrochemical resources and reduces greenhouse gas emissions.Safety: Sanitary materials often come into contact with human skin, and bio-based compostable hot melt adhesives are generally safe and do not release harmful substances.Brand Image: Using environmentally friendly and degradable materials to manufacture hygienic materials can enhance the brand image and attract consumers who care about environmental protection. This helps businesses gain a competitive advantage in the market.Regulatory Compliance: In some areas, governments have or are formulating regulations requiring sanitary materials to be degradable and environmentally friendly. Using bio-based compostable hot melt adhesives can help manufacturers meet these regulatory requirements.Reduces Stress on Landfills and Incineration: Because bio-based compostable hot melt adhesive degrades under composting conditions, it can reduce stress on landfills and incineration facilities because it does not create long-term contamination issues.It should be noted that although bio-based compostable hot melt adhesives have many advantages in terms of environmental protection, specific requirements such as product performance and water resistance still need to be considered when choosing to use them to ensure that they meet the functionality and actual use needs of hygienic materials. In addition, understanding the degradation characteristics of the product and its correct disposal is also important to ensure environmental protection.In the last mile of making sanitary products compostable, let Tex Year work with you to create a green economy and practice the concept of biological recycling. Our efforts are not only about the product itself, but also about creating more sustainable value.CONTACT US if you need further assistance. Our professional team of technical solution will be your strongest back up.

PUR Adhesives Used in Automotive IndustryHot melt adhesive and moisture-reactive polyurethane (PUR) hot melt adhesive are often used in car bodies and vehicle applications due to its high strength, flexibility, weather resistance and irreversible properties. Such as, lamps, automotive carpets, electronic equipment, automotive filtration, seating and interior applications. Automotive Adhesives Sealants MarketThe automotive adhesives and sealants market was valued at USD 6,414.1 million in 2020. As far as the global automotive industry is concerned, adhesives have become a key technology in the automotive industry, replacing welding and mechanical fasteners. The average family car uses more than 15kg of adhesive. Metal components are replaced with composite materials, bonded with adhesives, which reduces the car&#39;s weight and improves fuel efficiency. In addition to light weighting, manufacturers use adhesives to increase vehicle strength and rigidity, absorb vibrations and dampen unwanted engine and road noise, and overall improve passenger comfort and safety. Why Moisture-Reactive Polyurethane (PUR) Hot Melt Adhesive?In the automotive manufacturing industry, components must be designed and produced to meet requirements for accuracy, quality, safety, dependability and repeatability. So when automakers choose an adhesive to bond parts, they typically choose reactive polyurethane hot melts (PUR). Due to form a thermoset polymer with good solvent and chemical resistance, it has the advantages of good high/low temperature resistance, strong adhesive performance, impact resistance, etc. It can be used for bonding of various materials, and is used for seat and interior trim parts and automotive electronic components in automobile manufacturing. Hot melt adhesives are widely used in automobiles as they provide good adhesion to leather, fabric, glass and polymer-based surfaces. Tex Year glues and coatings commonly used in the automotive industry are as below:1.    Automotive Lamp SealantDue to the harsh environment in which the headlights are used, the temperature inside the headlights can be as high as 170°C when the lights are turned on for a long time. Therefore, the headlight glue must ensure that its performance is stable at high temperatures and does not release organic gases to cause atomization. In weather conditions such as wind and rain, the headlight glue needs to maintain stable performance under long-term erosion and impact from wind and rain. Under long-term exposure to the sun, the car lamp glue must also be able to withstand ultraviolet rays without causing cracks and other aging phenomena.Car lamp glue can use butyl rubber system, PUR hot melt adhesive system. PUR hot melt adhesive has the advantages of fast curing and high initial strength of hot melt adhesive. It can be quickly bonded and at the same time play a role of sealing, which not only reduces the cost but also facilitates automatic production. It has strong initial adhesion and fast curing speed, and can carry out other assembly processes without long-term storage after the lamp is glued. In the subsequent storage and transportation, it will further react with moisture in the air to increase the curing strength. Good temperature resistance, chemical corrosion resistance and aging resistance and other characteristics. BaseGradePackaging Spec.Viscosity (cps)PURR2120G/B18kg/ pail300ml/cartridge9,000 @120℃R2215G/B20kg/ pail12,000 @ 120℃Butyl Rubber HMABR021G/B18kg/CTN21,000 @200℃Gel-Like Sealant HMABR015G/B12kg/CTN15,200 @200℃ 2.    UV Primer Headlights are one of the most important parts of your car that need to be protected to extend their life. The main material of the lamp holder is PC/ABS and BMC. There will be fine unevenness on the plastic surface, which will cause random reflection during vacuum coating and affect the brightness. Use UV primer to fill in the unevenness of the plastic to make the coating smooth and fully reflect the brightness. GradeAppearanceViscosity (Sec,NK-2,25℃)1553BClearLight Yellow Liquid 12~14S 1553AClearLight Yellow Liquid 9.5~11S 1553CClearLight Yellow Liquid 11~13S  3.    Hard CoatCar lampshades are made of PMMA or PC. Long-term outdoor exposure is prone to yellowing, cracking, powdering and white fog. Moreover, when the vehicle is driving at high speed, the lamps are easily affected by sand and gravel impact, insect corpses, dust and oil and other substances are attached. Use Hard Coat protective coating to prevent changes from external factors and make the lights more durable. GradeAppearanceViscosity (Sec,NK-2,25℃)1552DClearLight Yellow Liquid 7~10S  4.  Automotive InteriorBase: PUR hot melt adhesive, hot melt adhesiveNowadays, automobile interiors are mostly made of leather, artificial leather, foam plastics, artificial sponges and other materials. During the manufacturing process, adhesives are used to composite and mold multiple layers of materials to improve the comfort of driving. Including car roofs, car sun visors, car trunk tire covers, dashboards, car seats, car pedals, compartment partitions, etc., are all attached using hot melt adhesive.PUR hot melt adhesive is a solvent-free solid compound that cross-links and solidifies quickly through moisture reaction. It has excellent adhesion to various materials and does not produce volatile substances. It meets environmental protection requirements and achieves things that ordinary hot melt adhesives cannot. Structural bonding and high and low temperature resistance are suitable for bonding and molding of car interiors, greatly improving the functionality, aesthetics and physical properties of car interiors. 5.    Bonding of Automotive Brand-Name and LogosBase: PUR hot melt adhesiveIn the past, the car brand-name used riveting connection methods, and the overall fit was not rigorous enough and lacked aesthetics. Nowadays, most temperature-resistant and aging-resistant PUR hot melt adhesives are used to bond brand-name and logos.Tex Year provides general EVA hot melt adhesive, hot melt pressure-sensitive adhesive, polyolefin hot melt adhesive, polyamide hot melt adhesive. PUR hot melt adhesive and two-component acrylic structural adhesive for automotive lights and roofs, including shed and various interior accessories.CONTACT US if you need further assistance. Our professional team of technical solution will be your strongest back up.

Introduction of 705TS1, Water Filtration Application Passed NSF TestHousehold Water Purifiers IntroductionReverse Osmosis (RO) is currently the most popular household water purifier, accounting for more than 60% of the market. Generally speaking, a RO machines have 4 filters, it uses a combination of filters to effectively remove contaminants and impurities from tap water. 4 Layers of PP Filters*From outside to inside, there are PP cotton (5μ PP) filter, CTO filter, PP cotton (1μ PP) filter and RO membrane (0.0001μ) filter. PP cotton (5μ PP) filter: It is the first filter element of general water purifiers and RO reverse osmosis. Its main function is to filter larger sand particles, hair and larger impurities in the water."Carbon Block Filter" or "Chlorine, Taste, and Odor" (CTO) filter: It is the second filter element of ordinary water purifiers and RO reverse osmosis. The main material is activated carbon fired into columns, and its function is to filter heavy metals and chlorine in water.PP cotton (1μ PP) filter: Providing denser pores, its main function is to filter impurities of 1-5u in water.RO membrane (0.0001μ) filter: (remove solid content in water) It is the fourth filter element of RO reverse osmosis. The main material is reverse osmosis membrane. Its function is to filter all impurities in the water (including limestone, heavy metals, bacteria...) and make the water suitable for drinking. If there is tea scale in the water, the water is blocked and the water cannot be discharged, the TDS quality is too high when tested with a water test pen, or the water output drops, it means that the filter element has failed and must be replaced immediately. About CTO filter, hot melt adhesive is applied to the components of the carbon block filter, such as the layers of activated carbon and the filter housing, while it is in a molten state. Once the adhesive cools down and solidifies, it creates a strong bond that holds the components of the filter together. The Process of CTO Filter ManufacturingCarbon particles + PP PowderExtrusion or CompressionCooling and CuttingAssembly and Bonding (by Hot melt adhesive) Tex Year New Products: 705TS1Properties:Shape: GranuleColor: WhiteSP: 84±5℃Open Time: 50 secSetting Time: 8 secWhat is NSF (National Sanitation Foundation)?It’s a non-profit independent organization, the work focuses on the impact of factors such as water, food, air and the environment on public health, and is committed to research and development of standards and evaluation of testing methods and other related topics.Commercial food processing and processing equipmentDrinking water chemical treatment agentsWater supply systems piping and fittingsBottled waterMicrobiological testing equipment waste water treatment and recovery systemsWater purification equipmentSwimming pools bath water quality and equipmentNSF WRAS BS 6920 TESTTo get the whole test report, please consult with our sales team!Once you get the certificate, validity period: 5 yearsBS 6920-2.2: Odor and flavor (Takes 14 working days)BS 6920-2.3: Color and turbidity (Takes 14 working days)BS 6920-2.4: Extraction of metals (Takes 7-9 weeks)BS 6920-2.5: Extraction of substances of concern to public health (Takes 5 working days)BS 6920-2.6: Growth of aquatic microorganisms (Takes 21-27 working days) Conclusion:Viscosity, setting time and crystallization speed will affect product yield.NSF certification is an essential requirement in the water purifier industry.705TS1 is currently the first product in the world to pass the NSF inspection.CONTACT US if you need further assistance. Our professional team of technical solution will be your strongest back up.*About PP FilterAlso known as melt-blown filter, is a tubular filter made of non-toxic and odorless polypropylene (Polypropylene), which is heated and melted, sprayed, drawn, and formed.It is commonly used as the first filter element of various household water purification equipment and is also the most basic filter element. It has the characteristics of large flow, corrosion resistance, high pressure resistance, and low cost. The main function of pretreating tap water is to extend the use time of the subsequent filter and filter larger impurities in the water, such as sediment, hair, suspended solids, colloids, organic matter, impurities, etc.

What kind of glue is used in mouse traps?TEX YEAR Best Hot Melt Adhesive for Rat Glue Traps / Mouse Glue Traps / Insect Glue Traps.TEX YEAR hot melt adhesives are characterized by high surface tack, and high bonding strength, which makes them the perfect adhesives that can work with rat glue traps and insect glue traps. Solvent-based adhesives are made as sprayer glue.Two types of rat/ insect glue traps make rats and insects difficult to get away with it after falling for the traps, which improves our environmental hygiene.Rat Glue Traps / Mouse Trap Glue / Insect Glue Traps  /  Mouse Glue TrapsLooking for Hot-Melt Adhesives?Don&#39;t know which glue to use?TEX YEAR provides a full range of Hot Melt Adhesives and Glues, or CONTACT US if you need further assistance.We have more than 40 years of experience in viscose technology, and our professional team of technical solutions will be your strongest backup.Contact us # Hot Melt Adhesive for Rat Glue Traps# Hot Melt Adhesive for Mouse Glue Traps# Hot Melt Adhesive for Insect Glue Traps# TEX YEAR since 1976

Go Green with Tex Year Group on Earth Day 2023The origin of Earth DayIt is an annual event celebrated on April 22nd every year to demonstrate support for environmental protection. The idea for Earth Day was first proposed by US Senator Gaylord Nelson in 1969. Senator Nelson was concerned about the lack of attention paid to environmental issues and the effects of pollution on the planet. Earth Day 2023Since then, Earth Day has grown into a global event, with millions of people in over 190 countries participating in activities to promote environmental awareness and action. The theme for Earth Day 2023 is "Invest in Our Planet," which highlights the importance of dedicating our time, resources, and energy to solving climate change and other environmental issues. Investing in our planet is necessary to protect it and the best way to pave a path towards a prosperous future. Go Green with Tex Year GroupOne way we can all make a difference is by using bio-based adhesives and compostable products. These products are made from natural materials that are biodegradable and do not harm the environment. They are a great alternative to traditional adhesives and products made from plastics and other harmful materials.Bio-based adhesives are made from natural materials such as starch, vegetable oils, and proteins. These adhesives are non-toxic and biodegradable, making them a great choice for environmentally conscious consumers. They can be used in a wide range of applications, from packaging to construction.Reference: Tex Year Bio-based Hot Melt Adhesive Sticks! Reduce Carbon Emissions, Natural Raw Materials for Multi-Purpose Home Craft.Compostable products are also a great choice for those looking to reduce their environmental impact. These products are made from materials that can be composted, such as plant-based fibers and materials derived from agricultural waste. They break down quickly in a compost pile, leaving behind nutrient-rich soil that can be used to grow more plants.Reference: Eco-Friendly Packaging: TexYear-Minima PLA Solutions Follow the Sustainable Trend.By using bio-based adhesives and compostable products, we can help to reduce the amount of waste that ends up in landfills and the environment. We can also support sustainable agriculture and reduce our dependence on non-renewable resources.This Earth Day, let&#39;s all do our part to restore our Earth by choosing eco-friendly products that are kinder to the planet. By making small changes in our daily lives, we can make a big impact on the health and sustainability of our planet for generations to come.CONTACT US if you need further assistance. Our professional team of technical solution will be your strongest back up.